VETUS marine diesel engine VH4.65

SKU: VH465---A
keyboard_arrow_up
keyboard_arrow_down

Product description

48 KW (65.3 HP), 3.000 RPM, 4 cilinder engine, 12 V/115 Amps alternator, intercooling. Option: keelcooling. Supplied as standard with instrument panel type MPA22BS2
Read morekeyboard_arrow_right

The VETUS Parts Finder

Go to the VETUS Parts Finder!

Find a VETUS dealer in your area

Use the dealer locator to find a VETUS location in your area.

Description

Details

The H-Line engines are sturdy, reliable engines and are suitable for many applications, such as cabin boats, small fishing boats and larger canal boats. These engines have low noise and vibration levels due to their robust construction. They are also highly fuel efficient. The H-line engines are four-cylinder 4-stroke engines with an indirect fuel injection system, a dual-circuit cooling system with integrated heat exchanger and a seawater injected exhaust bend. Available in two versions: VH4.65 and VH4.80.

A few advantages of these engines
  • Extremely favourable power to weight ratio
  • Very low noise and vibration levels due to counter balancing shafts
  • Very low fuel consumption
  • Minimum hose connections, owing to extensive use of moulded rubber cooling system components
  • High alternator output as standard, developed for marine applications for fast recharging of the batteries
  • Self bleeding fuel system
  • Suitable for
  • Cabin boats
  • Sailing boats
  • Small fishing boats
  • Options
  • The H-line engines can be supplied with gearbox or saildrive
  • Alternatively, the H-Line can be supplied with an adaptor kit to fit an existing Volvo Penta saildrive, type 110S, 120S or 120SB
  • Available as a powerpack complete with hydraulic pump, when hydraulic power is needed for auxiliary components on board
  • Specifications

    Additional Information

    Max. output at flywheel (ISO 3046-1) 48 kW (65,3 hp)
    Max. output at propeller shaft (ISO 3046-1) 46,6 kW (63,4 hp)
    Number of cylinders 4
    Bore x stroke (inches) 3 19/32 x 3 15/16
    Alternator 12 Volt - 115 Amp
    Capacity 2607 cm³
    Product review No
    Gearbox, standard TM345(A) 2/2.47:1
    Dry weight (lbs) 529
    Suction height of fuel lift pump (inches) 59
    Max. toerental (omw./minuut) 3000
    Optional ZF25A 1,93/2,29/2,71:1 ZF25 1,97/2,8:1
    Warning lights and audible alarm for Oil pressure, temperature (fresh and raw water), charging current.
    Control lights for Pre-heating
    Cooling system, standard Indirect cooling as standard (keel cooling optional)
    Max. installation angle (backwards) 15°
    Max. lateral inclination angle (continuously) 25°
    Max. lateral inclination angle (5 minutes max.) 30°
    Calorifier connection kit Optional
    Certification EU-RCD II
    Support and manuals