Steering systems for commercial craft
Choosing the right combination of pump and cylinder can be quite difficult. VETUS pumps and cylinders are fully compatible, enabling the builder and owner to choose the best combination.
-
MTP089B
VETUS axial plunger pump with 7 plungersHelmpump is suitable in combination with the MT cylinder series -
MTP151B
VETUS axial plunger pump with 7 plungersHelmpump is suitable in combination with the MT cylinder series -
MTP191B
VETUS axial plunger pump with 7 plungersHelmpump is suitable in combination with the MT cylinder series -
MT0230B
VETUS cylinder including flexible hosesThis cylinder has a base plate with a universal joint and swivelling rod end, so that alignment mistakes can be absorbed. Bleed nipples also included. -
MT0345B
VETUS cylinder including flexible hosesThis cylinder has a base plate with a universal joint and swivelling rod end, so that alignment mistakes can be absorbed. Bleed nipples also included. -
MT0455B
VETUS cylinder including flexible hosesThis cylinder has a base plate with a universal joint and swivelling rod end, so that alignment mistakes can be absorbed. Bleed nipples also included. -
MT0600B
VETUS cylinder including flexible hosesThis cylinder has a base plate with a universal joint and swivelling rod end, so that alignment mistakes can be absorbed. Bleed nipples also included. -
MT1200B
VETUS cylinder including flexible hosesThis cylinder has a base plate with a universal joint and swivelling rod end, so that alignment mistakes can be absorbed. Bleed nipples also included. -
HS74B
VETUS single non-return valve, G½, for 18mm tubing ,with by-pass valveSingle non return valve with intergrated by-bass -
HS42B
VETUS pressure relief valve, G½, for 18 mm tubingFor VETUS maximum pressure relive valve for hydraulic steering systems.
