Water lubricated stern gear
We offer several assemblies:
- Duplex stainless steel propeller shafts
- Bronze stern tube assembly
- G.R.P. stern tube assembly
- Steel stern tube assembly
-
ZWB3044
Replacementset forDual lip seal replacement set for older type of VETUS 30 mm inner bearing with stuffing box -
ZWB2540
Replacementset forDual lip seal replacement set for older type of VETUS 25 mm inner bearing with stuffing box -
SA25/1500
Stainless steel shaft 25 mm, length 1500 mmOne shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied. -
SA25/2000
Stainless steel shaft 25 mm, length 2000 mmOne shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied. -
SA25/2500
Stainless steel shaft 25 mm, length 2500 mmOne shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied. -
SA25/3000
Stainless steel shaft 25 mm, length 3000 mmOne shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied. -
BL25/500
Bronze stern tube with mounting flange and one bearing aft, l. 500 mm. Ø 25 mm.Water lubricated stern gear for G.R.P. or wooden vessels -
BL25/2000
Bronze stern tube with mounting flange and one bearing aft, l. 2000 mm. Ø 25 mm.Water lubricated stern gear for G.R.P. or wooden vessels -
BL25/1500
Artikelnaam: Bronze stern tube with mounting flange and one bearing aft, l. 1500 mm. Ø 25 mm.Water lubricated stern gear for G.R.P. or wooden vessels. -
BL25/1000
Bronze stern tube with mounting flange and one bearing aft, l. 1000 mm. Ø 25 mm.Water lubricated stern gear for G.R.P. or wooden vessels -
ZWB40A
VETUS bronze flexible inner bearing with dual lip seal, 40 mmDual lip seal for extra security against leaks. Front seal chamber packed with silicon grease. Also for replacing bearings with conventional gland packing. -
SA25/1000
Stainless steel shaft 25 mm, length 1000 mmOne shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied. -
BG25/0500
Polyester stern tubeG.R.P. (Polyester) stern tube suitable for a water lubricated propeller shaft assembly. -
BG25/1000
Polyester stern tubeG.R.P. (Polyester) stern tube suitable for a water lubricated propeller shaft assembly
