Water lubricated stern gear

We offer several assemblies:

  • Duplex stainless steel propeller shafts
  • Bronze stern tube assembly
  • G.R.P. stern tube assembly
  • Steel stern tube assembly

Water lubricated stern gear

Grid List

Set Descending Direction
Page:
  1. 1
  2. /2
  3. /3
  4. /4
  • ZWB3044

    Replacementset for
    Equipo de recambio con doble labio para cojinete interior 30 mm, para tubo exterior tipo BK
  • ZWB2540

    Replacementset for
    Dual lip seal replacement set for older type of VETUS 25 mm inner bearing with stuffing box
  • ZWBH25

    Self-aligning Inner Bearing
    Flexible inner bearing with triple lip seal.
  • ZWBH30

    Self-aligning Inner Bearing
    Flexible inner bearing with triple lip seal.
  • ZWBH35

    Self-aligning Inner Bearing
    Flexible inner bearing with triple lip seal.
  • BL25/2000

    Stern tube + bearing
    Water lubricated stern gear for G.R.P. or wooden vessels
  • BL25/1500

    Stern tube + bearing
    Water lubricated stern gear for G.R.P. or wooden vessels.
  • BL25/1000

    Stern tube + bearing
    Water lubricated stern gear for G.R.P. or wooden vessels
  • BL25/500

    Stern tube + bearing
    Water lubricated stern gear for G.R.P. or wooden vessels
  • SA25/3000

    Stainless steel shaft 25 mm, length 3000 mm
    One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
  • SA25/2500

    Stainless steel shaft 25 mm, length 2500 mm
    One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
  • SA25/2000

    Stainless steel shaft 25 mm, length 2000 mm
    One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
  • SA25/1500

    Stainless steel shaft 25 mm, length 1500 mm
    One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
  • SA25/1000

    Stainless steel shaft 25 mm, length 1000 mm
    One shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied.
  • ZWB40A

    VETUS bronze flexible inner bearing with dual lip seal, 40 mm
    Dual lip seal for extra security against leaks. Front seal chamber packed with silicon grease. Also for replacing bearings with conventional gland packing.
  • BG25/0500

    Polyester stern tube
    G.R.P. (Polyester) stern tube suitable for a water lubricated propeller shaft assembly.

Grid List

Set Descending Direction
Page:
  1. 1
  2. /2
  3. /3
  4. /4