Accesorios

Accesorios

Grid List

Set Descending Direction
Page:
  1. 1
  2. /2
  3. /3
  4. /4
  5. /5
  • P105074

    MAXset Bow Roller 4~6kg
    MAXSET bow roller satin for MAXSET 4kg & 6kg anchors.
  • SP2630

    Chain 10m 6mm DIN766 To
    Pre-spliced combination rope and chain.
  • P105060

    Anchor-Maxclaw 5kg St
    De “Maxclaw” roestvast stalen (AISI 316) ankerseries zijn gebaseerd op het bewezen “North Sea”ontwerp en zijn beschikbaar in 5 verschillende maten voor boten van 4 - 18 m (12 - 58 ft).
  • P105061

    Anchor-Maxclaw 7.5kg St
    The “MAXCLAW” 316 Stainless Steel anchor range, based on the proven ‘North Sea’ claw design is available in seven different sizes to suit boats from approximately 4 metres (12’) to 18 metres (58’).
  • SP3174

    Chain Snubber - 6/7mm +
  • SP3175

    Chain Snubber - 8mm +
  • SP3176

    Chain Snubber - 10/11mm
  • SP4469

    Chain 13mm DIN766 HDG
    Suitable for all Maxwell 8 mm DIN766 gypsies, plus the VETUS Alexander, Ajax and Ursus windlasses.
  • SP4465

    MAXWELL 10 MM CHAIN, DIN766, HEAVY DUTY GALVANISED, 100 METRES
    Suitable for all Maxwell 8 mm DIN766 gypsies, plus the VETUS Alexander, Ajax and Ursus windlasses.
  • P105062

    Anchor-Maxclaw 10kg St
    The “MAXCLAW” 316 Stainless Steel anchor range, based on the proven ‘North Sea’ claw design is available in seven different sizes to suit boats from approximately 4 metres (12’) to 18 metres (58’).
  • P105065

    Anchor-Maxclaw 30kg St
    The “MAXCLAW” 316 Stainless Steel anchor range, based on the proven ‘North Sea’ claw design is available in seven different sizes to suit boats from approximately 4 metres (12’) to 18 metres (58’).
  • P105066

    Anchor-Maxclaw 40kg St
    The “MAXCLAW” 316 Stainless Steel anchor range, based on the proven ‘North Sea’ claw design is available in seven different sizes to suit boats from approximately 4 metres (12’) to 18 metres (58’).
  • SP405160

    Chain 10mm x 60mtrs
  • P100715

    PM Solenoid Pack 12v
    Heavy duty solenoid for permanent magnet motor to switch motor in required direction. For use with windlass models HRC6, HRC8, RC6 and RC8-6.
  • P19045

    Reversing solenoid pack
    Heavy duty solenoid for permanent magnet motor to switch motor in required direction. For use with windlass models RC8-8, RC10, RC12, 1000 - 3500 series.
  • P19046

    Reversing solenoid pack
    Heavy duty solenoid for permanent magnet motor to switch motor in required direction. For use with windlass models RC8-8, RC10, RC12, 1000 - 3500 series.

Grid List

Set Descending Direction
Page:
  1. 1
  2. /2
  3. /3
  4. /4
  5. /5