Molinete vertical

Los molinetes verticales conforman la mayoría de las ventas de molinetes de ancla. Se caracterizan porque el cabestrante y/o barbotén (piezas de cubierta) se colocan encima de la cubierta, y el motor y el reductor debajo de la cubierta.

Molinete vertical

Grid List

Set Descending Direction
Page:
  1. 1
  2. /2
  3. /3
  4. /4
  5. /5
  • P100419

    1000 VWCLP 50TDC Hyd
    Designed for vertical handling, it has an independent capstan for retrieval of a secondary rope/chain rode or to assist with docking procedures.
  • P100428

    1500 VWCLP 50TDC Hyd
    Designed for vertical handling, it has an independent capstan for retrieval of a secondary rope/chain rode or to assist with docking procedures.
  • P104968

    RC12-HD Capstan 24V
    The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
  • P104970

    RC12-HD 24V
    The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
  • P104971

    RC12-HD 24V
    The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
  • P104969

    RC12-HD Capstan 24V
    The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
  • P104972

    RC12-HD Capstan 24V
    The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
  • P104973

    RC12-HD Capstan 24V
    The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
  • P104974

    RC12-12HD 24V
    The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
  • P104975

    RC12-HD 24V
    The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
  • P104989

    RC12-HD Capstan Hyd
    The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
  • P104990

    RC12-HD Capstan HYD
    The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
  • P104991

    RC12-HD HYD
    The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
  • P104992

    RC12-HD HYD
    The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
  • P104993

    RC12-HD Capstan HYD
    The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.
  • P104994

    RC12-HD Capstan HYD
    The RC12HD is designed for use with 10 mm to 13 mm (3/8" to 1/2'') short link chain with 18 mm to 24 mm (3/4''to 7/8'') Nylon rope, the motor and gearbox are sized to meet typical Classification Society test requirements for 12.5 mm U1 Stud link chain.

Grid List

Set Descending Direction
Page:
  1. 1
  2. /2
  3. /3
  4. /4
  5. /5