Calentadores
Los calderas marinas o calentadores de agua VETUS hacen uso del excedente de calor del motor para proporcionar agua potable caliente. También están equipados con una resistencia eléctrica para ser usada cuando el motor no esté en funcionamiento. Todos los calentadores VETUS incluyen soportes de montaje robustos para una instalación segura y un completo juego de conexiones con válvula de sobrepresión, además de una resistencia eléctrica de calentamiento de 1,5 kW.
-
WHT050
Twin coilTwin coil calorifiers with spiral tube to heat the water. Twin coil calorifiers with spiral tube to heat the water. -
WHKIT
Connectionkit for water-Connection set consists of 4 hose pillars G½ - 16 mm for 16 mm water hose, 1 T-piece, 1 pressure relief valve (4 bar), 1 non-return valve with drain points. -
WHEL110
Electric heatingThe WHEL110 electric heating element has an adjustable thermostat (40-80°C). Male thread size is ISO 228/1 G1¼ and screw-in length is 300 mm. -
WHEL220
El.heating elementThe WHEL220 electric heating element has an adjustable thermostat (40-80°C). Male thread size is ISO 228/1 G1¼ and screw-in length is 300 mm. -
WHEL22500
El.heating elementThe WHEL22500 electric heating element has an adjustable thermostat (40-80°C). Male thread size is ISO 228/1 G1¼ and screw-in length is 300 mm. -
WHMIXER
Thermostatic mixer forCalorifiers heated by engine coolant can produce too hot water, mixer taps are time consuming/waste hot water. The WHMIXER is safer, saves water and energy.
