Timones y cañas de timón
Estos timones tienen una pala de acero inoxidable y se suministran con una caña de timón al cual se puede conectar un cilindro de dirección hidráulica VETUS. Los lados de las palas están pulidas y no necesitan ningún acabado adicional.
-
RUDS4040
Rudderblade incl leverThis rudder has a blade made of stainless steel (AISI 316). The blade sides are polished and need no additional finishing. -
RUDS5040
Inox rudderbladeThis rudder has a blade made of stainless steel (AISI 316). The blade sides are polished and need no additional finishing. -
HELM30
Lever 30mm for rudderConnections made by in2 bolt clamps and 2 locking grub screws (included). There are 4 attachment points, making it suitable for several steering cylinders. -
HELM40
Lever 40mm for rudderConnections made by in2 bolt clamps and 2 locking grub screws (included). There are 4 attachment points, making it suitable for several steering cylinders. -
HELM50
Lever 50mm for rudderConnections made by 2 bolt clamps and a stainless steel key (included). There are 3 attachment points, making it suitable for several steering cylinders. -
HELM60
Lever 60mm for rudderConnections made by 2 bolt clamps and a stainless steel key (included). There are 3 attachment points, making it suitable for several steering cylinders. -
HENKO30
Ruddergland 30mmBronze rudder gland for 30 mm rudder shaft. Features twin O ring sealing. The length of the Standard version is 175 mm. -
HENKO30L
Ruddergland 30mmBronze rudder gland for 30 mm rudder shaft. Features twin O ring sealing. The length of the Standard version is 275 mm. -
HENKO40
Ruddergland 40mmBronze rudder gland for 40 mm rudder shaft. Features twin O ring sealing. The length of the Standard version is 205 mm. -
HENKO40L
Ruddergland 40mmBronze rudder gland for 40 mm rudder shaft. Features twin O ring sealing. The length of the Standard version is 305 mm.
