Líneas de ejes lubricadas por agua
Ofrecemos varios conjuntos:
- Ejes de la hélice de acero inoxidable dúplex
- Conjunto de tubo de popa de bronce
- Conjunto de tubo de popa de PRFV
- Conjunto de tubo de popa de acero
-
ZWB3044
Equipo recambioEquipo de recambio con doble labio para cojinete interior 30 mm, para tubo exterior tipo BK -
ZWB2540
Equipo recambioEquipo de recambio con doble labio para cojinete interior 25 mm, para tubo exterior tipo BK -
BL25/500
Cojinete exteriorCojinete exterior con tubo de bronce y cojinete de goma 25 mm Ø, 500 mm largo -
SA25/3000
Stainless steel shaft 25 mm, length 3000 mmOne shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied. -
SA25/2500
Stainless steel shaft 25 mm, length 2500 mmOne shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied. -
SA25/2000
Stainless steel shaft 25 mm, length 2000 mmOne shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied. -
SA25/1500
Stainless steel shaft 25 mm, length 1500 mmOne shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied. -
ZWB40A
40mm self-aligning innerDual lip seal for extra security against leaks. Front seal chamber packed with silicon grease. Also for replacing bearings with conventional gland packing.
