Water heaters / calorifiers

VETUS marine water heaters or calorifiers, make use of surplus heat from the engine to provide hot fresh water. They are also fitted with an electric heating element for use when the engine is not running.
All VETUS calorifiers include sturdy mounting brackets for safe installation and a complete connection set with pressure relief valve, plus a 1.5 kW electric heating element.

Water heaters / calorifiers

Grid List

Set Descending Direction
  • WHT025

    Twin coil
    These conventional calorifiers use a spiral tube to heat the water.
  • WHT050

    Twin coil
    Twin coil calorifiers with spiral tube to heat the water. Twin coil calorifiers with spiral tube to heat the water.
  • WHT075

    Twin coil
    Conventional calorifiers with a spiral tube to heat the water.
  • WHT100

    Twin coil
    Conventional calorifiers with a spiral tube to heat the water.
  • WH20C

    Calorifier
    Water is heated by 4 l. of engine coolant circulating between inner/outer jackets of boiler. Temp. loss only 12°C/day. Install horizontally/vertically.
  • WH31C

    VETUS 31 litre calorifier, incl. fitting kit and 230 V, 1000 W element
    Water is heated by 7 l. of engine coolant circulating between inner/outer jackets of boiler. Temp. loss only 12°C/day. Install horizontally/vertically.
  • WH45C

    VETUS 45 litre calorifier, incl. fitting kit and 230 V, 1000 W element
    Water is heated by 7.5 l. of engine coolant circulating between inner/outer jackets of boiler. Temp. loss only 12°C/day. Install horizontally/vertically.
  • WH55C

    Calorifier
    Water is heated by 8 l. of engine coolant circulating between inner/outer jackets of boiler. Temp. loss only 12°C/day. Install horizontally/vertically.
  • WH75C

    Calorifier
    Water is heated by 9.5 l. of engine coolant circulating between inner/outer jackets of boiler. Temp. loss only 12°C/day. Install horizontally/vertically.
  • WHKIT

    Connectionkit for water-
    Connection set consists of 4 hose pillars G½ - 16 mm for 16 mm water hose, 1 T-piece, 1 pressure relief valve (4 bar), 1 non-return valve with drain points.
  • WHEL110

    VETUS electric heating element 120 Volt, 1000 Watt, with thermostat
    The WHEL110 electric heating element has an adjustable thermostat (40-80°C). Male thread size is ISO 228/1 G1¼ and screw-in length is 300 mm.
  • WHEL220

    VETUS electric heating element 230 Volt, 1000 Watt, with thermostat
    The WHEL220 electric heating element has an adjustable thermostat (40-80°C). Male thread size is ISO 228/1 G1¼ and screw-in length is 300 mm.
  • WHEL22500

    VETUS electric heating element, 230 Volt, 500 Watt, with thermostat
    The WHEL22500 electric heating element has an adjustable thermostat (40-80°C). Male thread size is ISO 228/1 G1¼ and screw-in length is 300 mm.
  • WHMIXER

    Thermostatic mixer for
    Calorifiers heated by engine coolant can produce too hot water, mixer taps are time consuming/waste hot water. The WHMIXER is safer, saves water and energy.

Grid List

Set Descending Direction