Vertical windlasses

Vertical windlasses make up the majority of anchor winch sales. They are characterised by situating the capstan and/or gypsy (topworks) above the deck and the motor and gearbox below.

Vertical windlasses

Grid List

Set Descending Direction
Page:
  1. 1
  2. /2
  3. /3
  4. /4
  5. /5
  • P14099

    MAXWELL 2200 VW Hyd 100TDC, chainwheel for 9-11 mm chain
    The VW anchor winches are designed for traditional rope and chain combination. Manual transfer of the rode to the chainwheel is required.
  • P102769

    MAXWELL 1000 VW 12 V 100TDC, chainwheel for 6-8 mm chain
    The VW anchor winches are designed for traditional rope and chain combination. Manual transfer of the rode to the chainwheel is required.
  • P102770

    MAXWELL 1000 VW 24 V 100TDC, chainwheel for 6-8 mm chain
    The VW anchor winches are designed for traditional rope and chain combination. Manual transfer of the rode to the chainwheel is required.
  • P102771

    MAXWELL 1000 VW Hyd 100TDC, chainwheel for 6-8 mm chain
    The VW anchor winches are designed for traditional rope and chain combination. Manual transfer of the rode to the chainwheel is required.
  • P102778

    MAXWELL 1500 VW 12 V 100TDC, chainwheel for 6-10 mm chain
    The VW anchor winches are designed for traditional rope and chain combination. Manual transfer of the rode to the chainwheel is required.
  • P102779

    MAXWELL 1500 VW 24 V 100TDC, chainwheel for 6-10 mm chain
    The VW anchor winches are designed for traditional rope and chain combination. Manual transfer of the rode to the chainwheel is required.
  • P102780

    MAXWELL 1500 VW Hyd 100TDC, chainwheel for 6-10 mm chain
    The VW anchor winches are designed for traditional rope and chain combination. Manual transfer of the rode to the chainwheel is required.
  • P16496

    MAXWELL 3500 VW 12 V 100TDC, chainwheel for 8-13 mm chain
    The VW anchor winches are designed for traditional rope and chain combination. Manual transfer of the rode to the chainwheel is required.
  • P16497

    MAXWELL 3500 VW 24 V 100TDC, chainwheel for 8-13 mm chain
    The VW anchor winches are designed for traditional rope and chain combination. Manual transfer of the rode to the chainwheel is required.
  • P16492

    MAXWELL 3500 VW Hyd 100TDC, chainwheel for 8-13 mm chain
    The VW anchor winches are designed for traditional rope and chain combination. Manual transfer of the rode to the chainwheel is required.
  • P100420

    MAXWELL 1000 VWCLP 12 V 100TDC, chainwheel for 6-8 mm chain
    Designed for vertical handling, it has an independent capstan for retrieval of a secondary rope/chain rode or to assist with docking procedures.
  • P100421

    MAXWELL 1000 VWCLP 24 V 100TDC, chainwheel for 6-8 mm chain
    Designed for vertical handling, it has an independent capstan for retrieval of a secondary rope/chain rode or to assist with docking procedures.
  • P100422

    MAXWELL 1000 VWCLP Hydraulic 100TDC, chainwheel for 6-8 mm chain
    Designed for vertical handling, it has an independent capstan for retrieval of a secondary rope/chain rode or to assist with docking procedures.
  • P102717

    MAXWELL 1000 VWC 12 V 100TDC, capstan, chainwheel for 6-8 mm chain
    Designed for vertical handling, it has an independent capstan for retrieval of a secondary rope/chain rode or to assist with docking procedures.
  • P102718

    MAXWELL 1000 VWC 24 V 100TDC, capstan, chainwheel for 6-8 mm chain
    Designed for vertical handling, it has an independent capstan for retrieval of a secondary rope/chain rode or to assist with docking procedures.
  • P102721

    MAXWELL 1000 VWC Hyd 100TDC, capstan, chainwheel for 6-8 mm chain
    Designed for vertical handling, it has an independent capstan for retrieval of a secondary rope/chain rode or to assist with docking procedures.

Grid List

Set Descending Direction
Page:
  1. 1
  2. /2
  3. /3
  4. /4
  5. /5