Бойлеры

Судовые бойлеры (или калориферы) VETUS используют тепло, излучаемое двигателем, для нагрева пресной воды. Они также имеют 1.5 кВт нагревательный элемент, который используется, когда двигатель не работает. В комплект поставки входит предохранительный клапан и набор фитингов. Все бойлеры VETUS снабжены лапами для надежного крепления.

Бойлеры

Grid List

Set Descending Direction
  • WHT025

    Twin coil
    These conventional calorifiers use a spiral tube to heat the water.
  • WHT050

    Twin coil
    Twin coil calorifiers with spiral tube to heat the water. Twin coil calorifiers with spiral tube to heat the water.
  • WHT075

    Twin coil
    Conventional calorifiers with a spiral tube to heat the water.
  • WHT100

    Twin coil
    Conventional calorifiers with a spiral tube to heat the water.
  • WH20C

    Calorifier
    Water is heated by 4 l. of engine coolant circulating between inner/outer jackets of boiler. Temp. loss only 12°C/day. Install horizontally/vertically.
  • WH31C

    Calorifier
    Water is heated by 7 l. of engine coolant circulating between inner/outer jackets of boiler. Temp. loss only 12°C/day. Install horizontally/vertically.
  • WH45C

    Calorifier
    Water is heated by 7.5 l. of engine coolant circulating between inner/outer jackets of boiler. Temp. loss only 12°C/day. Install horizontally/vertically.
  • WH55C

    Calorifier
    Water is heated by 8 l. of engine coolant circulating between inner/outer jackets of boiler. Temp. loss only 12°C/day. Install horizontally/vertically.
  • WH75C

    Calorifier
    Water is heated by 9.5 l. of engine coolant circulating between inner/outer jackets of boiler. Temp. loss only 12°C/day. Install horizontally/vertically.
  • WHKIT

    Connectionkit for water-
    Connection set consists of 4 hose pillars G½ - 16 mm for 16 mm water hose, 1 T-piece, 1 pressure relief valve (4 bar), 1 non-return valve with drain points.
  • WHEL110

    Electric heating
    The WHEL110 electric heating element has an adjustable thermostat (40-80°C). Male thread size is ISO 228/1 G1¼ and screw-in length is 300 mm.
  • WHEL220

    El.heating element
    The WHEL220 electric heating element has an adjustable thermostat (40-80°C). Male thread size is ISO 228/1 G1¼ and screw-in length is 300 mm.
  • WHEL22500

    El.heating element
    The WHEL22500 electric heating element has an adjustable thermostat (40-80°C). Male thread size is ISO 228/1 G1¼ and screw-in length is 300 mm.
  • WHMIXER

    Thermostatic mixer for
    Calorifiers heated by engine coolant can produce too hot water, mixer taps are time consuming/waste hot water. The WHMIXER is safer, saves water and energy.

Grid List

Set Descending Direction