Части валопровода
We offer several assemblies:
- Duplex stainless steel propeller shafts
- Bronze stern tube assembly
- G.R.P. stern tube assembly
- Steel stern tube assembly
-
ZWB3044
Replacementset forDual lip seal replacement set for older type of VETUS 30 mm inner bearing with stuffing box -
ZWB2540
Replacementset forDual lip seal replacement set for older type of VETUS 25 mm inner bearing with stuffing box -
SA25/1500
Stainless steel shaft 25 mm, length 1500 mmOne shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied. -
SA25/2000
Stainless steel shaft 25 mm, length 2000 mmOne shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied. -
SA25/2500
Stainless steel shaft 25 mm, length 2500 mmOne shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied. -
SA25/3000
Stainless steel shaft 25 mm, length 3000 mmOne shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied. -
BL25/500
Bronze stern tube with mounting flange and one bearing aft, l. 500 mm. Ø 25 mm.Water lubricated stern gear for G.R.P. or wooden vessels -
BL25/2000
Bronze stern tube with mounting flange and one bearing aft, l. 2000 mm. Ø 25 mm.Water lubricated stern gear for G.R.P. or wooden vessels -
BL25/1500
Artikelnaam: Bronze stern tube with mounting flange and one bearing aft, l. 1500 mm. Ø 25 mm.Water lubricated stern gear for G.R.P. or wooden vessels. -
BL25/1000
Bronze stern tube with mounting flange and one bearing aft, l. 1000 mm. Ø 25 mm.Water lubricated stern gear for G.R.P. or wooden vessels -
ZWB40A
40mm self-aligning innerDual lip seal for extra security against leaks. Front seal chamber packed with silicon grease. Also for replacing bearings with conventional gland packing. -
SA25/1000
Stainless steel shaft 25 mm, length 1000 mmOne shaft end is machined with a 1:10 taper and a keyway as standard. Matching key, tab washer and propeller nut with integrated zinc anode also supplied. -
BG25/0500
Polyester stern tubeG.R.P. (Polyester) stern tube suitable for a water lubricated propeller shaft assembly. -
BG25/1000
Polyester stern tubeG.R.P. (Polyester) stern tube suitable for a water lubricated propeller shaft assembly
