Accessories

Accessories

Grid List

Set Descending Direction
Page:
  1. 1
  2. /2
  3. /3
  • VHS1

    VETUS Hydraulic Steering oil
    VETUS Hydraulic Steering oil is a very thin, hydraulic steering oil for optimal functioning in all temperatures.
  • HHOSE6015

    Nylon hose 6x10mm
    Suitable for cylinders MTC52-175. Requires sleeve insert HS145S.
  • HHOSE6030

    VETUS nylon hose 6 x 10 mm, roll of 30 metres
    Suitable for cylinders MTC52-175. Requires sleeve insert HS145S.
  • HHOSE6050

    Nylon hose 6x10mm
    Suitable for cylinders MTC52-175. Requires sleeve insert HS145S.
  • HHOSE8015

    Nylon hose 8x12mm
    Suitable for cylinders MTC52-175. Requires hose connectors HS1031MS (straight) or HS1037MS (angled).
  • HHOSE8030

    Nylon hose 8x12mm
    Suitable for cylinders MTC52-175. Requires hose connectors HS1031MS (straight) or HS1037MS (angled).
  • HHOSE8050

    VETUS nylon hose 8 x 12 mm, roll of 50 metres
    Suitable for cylinders MTC52-175. Requires hose connectors HS1031MS (straight) or HS1037MS (angled).
  • HHOSE8100

    Nylon hose 8x12mm
    Suitable for cylinders MTC52-175. Requires hose connectors HS1031MS (straight) or HS1037MS (angled).
  • HS04N

    VETUS nylon hose 6 x 8 mm, for cylinder MTC30, roll of 15 metres
    Use with HS1011S support sleaves.
  • HS100N

    VETUS nylon hose 6 x 8 mm, for cylinder MTC30, roll of 100 metres
    Use with HS1011S support sleaves.
  • COPPER08

    VETUS copper tubing, 6 x 8 mm, per roll of 16 meter
    Suitable for VETUS hydraulic steering systems.
  • COPPER10

    VETUS copper tubing, 8 x 10 mm, per roll of 20 meter
    Suitable for VETUS hydraulic steering systems.
  • COPPER18

    VETUS copper tubing, 15 x 18 mm, per roll of 10 meter
    Suitable for VETUS hydraulic steering systems.
  • K30/140B

    VETUS dual non-return valve block K30/140, for MTC cylinders
    If dual station steering is required, then it is necessary to install this block, or to use two steering pumps with built in non-return valves (type HTPR).
  • KITK30

    VETUS fitting kit 8 mm for dual non-return valve
    Fitting kit to be used with K30/140 and MTC3008.
  • KITK52175

    VETUS fitting kit 10 mm for dual non-return valve
    Fitting kit to be used with K30/140 and MTC5210-MTC17510.

Grid List

Set Descending Direction
Page:
  1. 1
  2. /2
  3. /3