Steering systems for outboard engines/z-drive

A VETUS outboard engine/Z-drive steering system consists of a steering pump with a non-return and pressure relief valves as well as a cylinder. The cylinder is connected to the pump with nylon hydraulic hose.

Steering systems for outboard engines/z-drive

Grid List

Set Descending Direction
  • OB1000

    VETUS stainless steel tie bar for outboard engines
    Suitable for connecting two 300 hp outboard motors so that they turn the exact same angle when the steering wheel is operated. Including connection bolts.
  • OBC125

    VETUS hydraulic cylinder for outboard steering OB125
    Hydraulic cylinder for outboard engines/z-drives up to 125 hp. With stainless steel piston rod.
  • OBC150

    VETUS hydraulic cylinder for outboard steering OB150
    Hydraulic cylinder for outboard engines/z-drives up to 150 hp. With stainless steel piston rod.
  • OBC225

    VETUS hydraulic cylinder for outboard steering OB225
    Hydraulic cylinder for outboard engines/z-drives up to 225 hp. With stainless steel piston rod.
  • OBC275

    VETUS hydraulic cylinder for outboard steering OB275
    Hydraulic cylinder for outboard engines/z-drives up to 300 hp. With stainless steel piston rod.
  • MTC100Z

    VETUS hydraulic cylinder for outboard steering and Z-Drive
    For Z-Drives up to 300 Hp. Designed to screw into the outboard steering tube fitting.
  • HHOSE6015

    Nylon hose 6x10mm
    Suitable for cylinders MTC52-175. Requires sleeve insert HS145S.
  • HHOSE6030

    VETUS nylon hose 6 x 10 mm, roll of 30 metres
    Suitable for cylinders MTC52-175. Requires sleeve insert HS145S.
  • HHOSE6050

    Nylon hose 6x10mm
    Suitable for cylinders MTC52-175. Requires sleeve insert HS145S.
  • HHOSE6100

    Nylon hose 6x10mm
    Suitable for cylinders MTC52-175. Requires sleeve insert HS145S.
  • HHOSE8015

    Nylon hose 8x12mm
    Suitable for cylinders MTC52-175. Requires hose connectors HS1031MS (straight) or HS1037MS (angled).
  • HHOSE8030

    Nylon hose 8x12mm
    Suitable for cylinders MTC52-175. Requires hose connectors HS1031MS (straight) or HS1037MS (angled).
  • HHOSE8050

    VETUS nylon hose 8 x 12 mm, roll of 50 metres
    Suitable for cylinders MTC52-175. Requires hose connectors HS1031MS (straight) or HS1037MS (angled).
  • HHOSE8100

    Nylon hose 8x12mm
    Suitable for cylinders MTC52-175. Requires hose connectors HS1031MS (straight) or HS1037MS (angled).

Grid List

Set Descending Direction