Water lubricated stern gear

We offer several assemblies:

  • Duplex stainless steel propeller shafts
  • Bronze stern tube assembly
  • G.R.P. stern tube assembly
  • Steel stern tube assembly

Water lubricated stern gear

Grid List

Set Descending Direction
Page:
  1. 1
  2. /2
  3. /3
  4. /4
  5. /5
  • ZWB3044

    Self-alligning inner bearing (30mm)
    The VETUS flexible inner bearing used in this system has dual sealing lips, as double security against water leakage
  • ZWB2540

    Self-aligning inner bearing (25mm)
    The VETUS flexible inner bearing used in this system has dual sealing lips with double security against water leakage.
  • RL1012

    VETUS water lubricated cutlass bearing, shaft 100 mm, length 400 mm
    Cutlass bearing with brass outer bushing and polyurethane-rubber lining. VETUS rubber bearings are, upon request, also available for larger shaft diameters.
  • RL1012PH

    VETUS water lubricated cutlass bearing, shaft 100 mm, length 400 mm
    Cutlass bearing with phenolic resin outer bushing, which is lighter in weight, cannot corrode and may be replaced very easily. Ideal for aluminium boats.
  • RL11/2PH

    VETUS water lubricated cutlass bearing, shaft 1½", length 6"
    Cutlass bearing with phenolic resin outer bushing, which is lighter in weight, cannot corrode and may be replaced very easily. Ideal for aluminium boats.
  • RL11/8PH

    VETUS water lubricated cutlass bearing, shaft 1?", length 4 ½"
    Cutlass bearing with phenolic resin outer bushing, which is lighter in weight, cannot corrode and may be replaced very easily. Ideal for aluminium boats.
  • RL13/4PH

    VETUS water lubricated cutlass bearing, shaft 1¾", length 7"
    Cutlass bearing with phenolic resin outer bushing, which is lighter in weight, cannot corrode and may be replaced very easily. Ideal for aluminium boats.
  • RL13/8PH

    VETUS water lubricated cutlass bearing, shaft 1?", length 5 ½"
    Cutlass bearing with phenolic resin outer bushing, which is lighter in weight, cannot corrode and may be replaced very easily. Ideal for aluminium boats.
  • RL1PH

    VETUS water lubricated cutlass bearing, shaft 1½", length 4"
    Cutlass bearing with phenolic resin outer bushing, which is lighter in weight, cannot corrode and may be replaced very easily. Ideal for aluminium boats.
  • RL21/2PH

    VETUS water lubricated cutlass bearing, shaft 2½", length 10"
    Cutlass bearing with phenolic resin outer bushing, which is lighter in weight, cannot corrode and may be replaced very easily. Ideal for aluminium boats.
  • RL21/4PH

    VETUS water lubricated cutlass bearing, shaft 2", length 9"
    Cutlass bearing with phenolic resin outer bushing, which is lighter in weight, cannot corrode and may be replaced very easily. Ideal for aluminium boats.
  • RL23/4PH

    VETUS water lubricated cutlass bearing, shaft 2¾", length 11"
    Cutlass bearing with phenolic resin outer bushing, which is lighter in weight, cannot corrode and may be replaced very easily. Ideal for aluminium boats.
  • RL2540

    VETUS water lubricated cutlass bearing, shaft 25 mm, length 100 mm
    Cutlass bearing with brass outer bushing and polyurethane-rubber lining. VETUS rubber bearings are, upon request, also available for larger shaft diameters.
  • RL2540PH

    VETUS water lubricated cutlass bearing, shaft 25 mm, length 100 mm
    Cutlass bearing with phenolic resin outer bushing, which is lighter in weight, cannot corrode and may be replaced very easily. Ideal for aluminium boats.
  • RL2PH

    VETUS water lubricated cutlass bearing, shaft 2", length 8"
    Cutlass bearing with phenolic resin outer bushing, which is lighter in weight, cannot corrode and may be replaced very easily. Ideal for aluminium boats.
  • RL3045

    VETUS water lubricated cutlass bearing, shaft 30 mm, length 120 mm
    Cutlass bearing with brass outer bushing and polyurethane-rubber lining. VETUS rubber bearings are, upon request, also available for larger shaft diameters.

Grid List

Set Descending Direction
Page:
  1. 1
  2. /2
  3. /3
  4. /4
  5. /5